12mm Metal Gear Motor Model NFP-GM12-N20-M4-NT
$15.00
Elevate your projects with the N20 gear motor with thread shaft lead screw, delivering precision and reliability. Unlock its potential now! ⚙️
N20 DC Gear Motor With 55mm Length Threaded Screw Datasheet
The NFP-GM12-N20-M4-NT is an N20 DC gear motor with a 55mm threaded screw shaft. It supports 3V, 6V, and 12V DC power options for compact linear motion systems.
First, the motor uses an M4 * 0.7 threaded screw with a total length of 55mm and an effective length of 52mm. Therefore, it is useful for small push-pull structures and compact actuator designs.
In addition, the motor supports CW and CCW rotation. As a result, it can move a matching nut or mechanism forward and backward when installed correctly.
Main Product Features
- First, long threaded shaft: The total threaded shaft length is 55mm, with 52mm effective length.
- In addition, M4 screw output: The shaft uses an M4 * 0.7 threaded screw.
- Also, voltage options: The motor supports 3V DC to 12V DC operation.
- Next, reversible rotation: CW and CCW rotation support forward and reverse movement.
- Finally, compact weight: The motor weighs approximately 15g.
General Motor Data
Next, the table below helps users check shaft length, screw size, voltage, rotation, and weight. Therefore, it is easier to confirm whether this N20 threaded shaft motor fits the final product design.
| Motor Model | NFP-GM12-N20-M4-NT |
|---|---|
| Threaded Shaft Length | Total length 55mm, Effective length 52mm |
| Shaft Diameter | M4 * 0.7 Threaded Screw |
| Rated Voltage | 3V DC – 12V DC |
| Rotation | CW / CCW |
| Weight | appr. 15g |
Also, the M4 threaded screw can help convert rotation into linear motion when used with a matching nut. As a result, it is suitable for compact actuator and adjustment mechanisms.
Model: NFP-GM12-N20-M4-NT, 3V DC
First, the 3V DC table is suitable for low-voltage products that need small linear motion and controlled speed. Therefore, users can compare 30:1, 50:1, 100:1, and 298:1 ratio options before sample testing.
| Item | 30:1 (45 Type) | 30:1 (26 Type) | 50:1 (45 Type) | 50:1 (26 Type) | 100:1 (45 Type) | 100:1 (26 Type) | 298:1 (45 Type) | 298:1 (26 Type) |
|---|---|---|---|---|---|---|---|---|
| No-load Speed | 400 rpm | 270 rpm | 240 rpm | 160 rpm | 120 rpm | 82 rpm | 40 rpm | 27 rpm |
| No-load Current | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA |
| Rated Torque | 0.12 kg.cm | 0.12 kg.cm | 0.20 kg.cm | 0.12 kg.cm | 0.40 kg.cm | 0.40 kg.cm | 1.20 kg.cm | 1.20 kg.cm |
| Rated Speed | 260 rpm | 170 rpm | 150 rpm | 90 rpm | 80 rpm | 50 rpm | 26 rpm | 16 rpm |
| Rated Current | ≤0.27 A | ≤0.18 A | ≤0.27 A | ≤0.18 A | ≤0.27 A | ≤0.18 A | ≤0.27 A | ≤0.18 A |
| Stall Torque | 0.30 kg.cm | 0.23 kg.cm | 0.50 kg.cm | 0.40 kg.cm | 1.00 kg.cm | 0.75 kg.cm | 3.00 kg.cm | 2.80 kg.cm |
| Stall Current | ≤0.65 A | ≤0.32 A | ≤0.65 A | ≤0.32 A | ≤0.65 A | ≤0.32 A | ≤0.65 A | ≤0.32 A |
Note: All reduced no-load speeds have a tolerance of ±15%.
Also, the 298:1 versions provide the lowest speed and highest torque in the 3V table. As a result, they are useful for slow and stronger low-voltage linear motion.
Model: NFP-GM12-N20-M4-NT, 6V DC
In addition, the 6V DC table offers higher voltage operation for compact drive systems. Therefore, users can compare 35 Type and 26 Type options for speed, current, torque, and stall data.
| Item | 30:1 (35 Type) | 30:1 (26 Type) | 50:1 (35 Type) | 50:1 (26 Type) | 100:1 (35 Type) | 100:1 (26 Type) | 298:1 (35 Type) | 298:1 (26 Type) |
|---|---|---|---|---|---|---|---|---|
| No-load Speed | 350 rpm | 550 rpm | 210 rpm | 330 rpm | 105 rpm | 165 rpm | 35 rpm | 54 rpm |
| No-load Current | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA | ≤45 mA |
| Rated Torque | 0.12 kg.cm | 0.15 kg.cm | 0.10 kg.cm | 0.25 kg.cm | 0.40 kg.cm | 0.50 kg.cm | 1.20 kg.cm | 1.50 kg.cm |
| Rated Speed | 170 rpm | 320 rpm | 150 rpm | 195 rpm | 60 rpm | 95 rpm | 18 rpm | 32 rpm |
| Rated Current | ≤0.20 A | ≤0.25 A | ≤0.20 A | ≤0.25 A | ≤0.20 A | ≤0.25 A | ≤0.20 A | ≤0.25 A |
| Stall Torque | 0.30 kg.cm | 0.35 kg.cm | 0.40 kg.cm | 0.60 kg.cm | 0.80 kg.cm | 1.10 kg.cm | 2.30 kg.cm | 3.00 kg.cm |
| Stall Current | ≤0.25 A | ≤0.55 A | ≤0.25 A | ≤0.55 A | ≤0.25 A | ≤0.55 A | ≤0.25 A | ≤0.55 A |
Note: All reduced no-load speeds have a tolerance of ±15%.
Also, the 6V 26 Type versions give higher no-load speed and higher stall torque in several ratios. However, they also use higher stall current than the 35 Type versions.
Model: NFP-GM12-N20-M4-NT, 12V DC
Next, the 12V DC table provides higher-voltage options for faster and more stable gear motor output. As a result, users can choose between 35 Type and 05 Type versions based on speed, current, and torque needs.
| Item | 30:1 (35 Type) | 30:1 (05 Type) | 50:1 (35 Type) | 50:1 (05 Type) | 100:1 (35 Type) | 100:1 (05 Type) | 298:1 (35 Type) | 298:1 (05 Type) |
|---|---|---|---|---|---|---|---|---|
| No-load Speed | 710 rpm | 500 rpm | 430 rpm | 300 rpm | 210 rpm | 150 rpm | 72 rpm | 50 rpm |
| No-load Current | ≤55 mA | ≤30 mA | ≤55 mA | ≤30 mA | ≤55 mA | ≤30 mA | ≤55 mA | ≤30 mA |
| Rated Torque | 0.15 kg.cm | 0.12 kg.cm | 0.25 kg.cm | 0.10 kg.cm | 0.50 kg.cm | 0.40 kg.cm | 1.50 kg.cm | 1.20 kg.cm |
| Rated Speed | 480 rpm | 300 rpm | 290 rpm | 240 rpm | 145 rpm | 90 rpm | 48 rpm | 32 rpm |
| Rated Current | ≤0.21 A | ≤0.08 A | ≤0.21 A | ≤0.08 A | ≤0.21 A | ≤0.08 A | ≤0.21 A | ≤0.08 A |
| Stall Torque | 0.40 kg.cm | 0.30 kg.cm | 1.30 kg.cm | 0.90 kg.cm | 1.30 kg.cm | 0.90 kg.cm | 3.00 kg.cm | 2.60 kg.cm |
| Stall Current | ≤0.50 A | ≤0.25 A | ≤0.50 A | ≤0.25 A | ≤0.50 A | ≤0.25 A | ≤0.50 A | ≤0.25 A |
Note: All reduced no-load speeds have a tolerance of ±15%.
Also, the 12V 35 Type versions provide higher speed and stronger torque than the 05 Type versions. However, the 05 Type versions use lower no-load current, rated current, and stall current.
M4 Screw Shaft Outline Drawing
First, the outline drawing helps users review the N20 gear motor body, M4 threaded screw shaft, and installation size. Therefore, it is useful before sample testing and final product design.
In addition, the 55mm threaded shaft is suitable for compact linear motion mechanisms. As a result, this motor can support small actuators, adjustment systems, and precision screw-drive structures.
Outline Drawing and Design Benefits
- First, M4 threaded shaft: The M4 * 0.7 screw helps support small linear motion.
- In addition, long travel design: The 52mm effective threaded length supports longer movement than short-shaft motors.
- Also, compact N20 gearbox: The small gearbox helps save installation space.
- Next, voltage flexibility: The motor supports 3V, 6V, and 12V DC systems.
- Finally, reversible movement: CW and CCW rotation can support forward and reverse screw motion.
Typical Applications
Next, this N20 DC gear motor with M4 threaded screw is suitable for compact products that need linear movement, low speed, and practical torque. For example, it can work in small actuators, smart locks, model mechanisms, and adjustment devices.
- Small linear actuators
- Smart locks
- Model mechanisms
- Adjustment devices
- Miniature push-pull systems
- Precision screw-drive products
- Compact automation projects
Finally, the NFP-GM12-N20-M4-NT gear motor is a good fit for products that need 3V to 12V DC power, 55mm M4 threaded shaft, compact N20 gearbox size, CW/CCW rotation, and reliable screw-drive output.
Keywords: gear reduction motor with neodymium, magnetic reduction motor with thread shaft, precision threaded shaft motor
1.Payment methods : Paypal, T/T
Shipping:
1.Delivery: DHL/FedEx 3-5 days.
2.Item will be shipped within 1-3 business days after the payment.
3.If you haven’t received the item on the Delivery Time, pls contact us by email if you have any questions. Normally, we will give you a reply within 24 hours, if not, pls check the spam of your email box. We will do our best to help you solve the problems.
4.Please make sure your address is matched with the finally shipping address before you pay.
FAQ
Q: If customized, what information should you provide?
A: You need to provide the basic specification of the motor, such as: Dimensions, Sizes Applications, Voltage, Speed and Torque. It’s better to offer application prototype drawings to us if possible.
Q: What’s your main motors?
A: Diameter 4mm~42mm Dc Micro Motor And Gear Motor, Auto Dc Motor, Electric Motor, Gear Motor, Mini Dc Motor, Brush Dc Motor, Brushless Dc Motor, Spur Gear Motor, Micro Motor, Vibration Motor Etc.
Q: What’s the main application of the micro dc motor?
A: Our mini DC motors are widely used in Home Applications, Office Equipment, Health-Care Application, Sanitation Industry, High-Class Toy, Banking System, Electronic and Electrical Tools, Automation Industry, Bank Equipments, Payment Equipments, Vending Machines, Power Door Lock, Electric Door Lock.
Nancy –
The shaft length is quite unusual, and the smooth operation and strong output of the motor are impressive. It is compact and powerful.