50mm Worm Gear Motor Model NFP-WG5882-50ZY-EN

Single Shaft With Encoder DC Turbine Worm Gear Motor Parameters

First, the NFP-5882-50ZY-EN is a single shaft DC turbine worm gear motor with encoder feedback. Also, it supports 12V and 24V DC power options.

In addition, this model provides speed regulation and position feedback. Therefore, it is suitable for drive systems that need high torque, stable speed, and more accurate motion control.

Moreover, the worm gearbox supports low-speed high-torque output. As a result, this motor can work in automation equipment, lifting systems, heavy-duty mechanisms, and precision drive units.

Main Product Features

• First, encoder feedback: The encoder supports speed feedback and motion control.
• In addition, single shaft output: The structure supports direct mechanical connection.
• Also, high torque output: The motor can provide up to 200kg.cm rated torque.
• Next, voltage options: The motor supports 12V and 24V DC systems.
• Moreover, D-shaped shaft: The shaft helps improve coupling grip and reduce slipping.
• Finally, speed regulation: The motor supports more stable controlled operation.

Basic Motor Specifications

First, the table below shows the main motor data. Also, it helps users check voltage, current, speed, torque, power, rotation, encoder support, shaft size, and weight before choosing a ratio.

Therefore, this motor is a strong option for high-load applications. Moreover, the encoder helps users build systems that need feedback and repeatable movement.

Encoder Worm Gear Motor Performance Data

Model: NFP-5882-50ZY-EN, 12V DC

First, the 12V DC version provides a wide speed range from 1.5rpm to 440rpm. Therefore, users can choose faster output or stronger low-speed torque based on the final load.

In addition, lower ratios provide higher output speed. However, higher ratios provide lower speed and stronger torque for heavy-load drive tasks.

Note: All reduced no-load / rated load speeds have a tolerance of ±10%.

As a result, the 12V version covers no-load speeds from 1.5rpm to 440rpm. Moreover, the 510:1, 694:1, and 1015:1 options provide the strongest rated torque in this table.

12V DC Selection Notes

• First, for higher speed: Choose 16:1, 32:1, or 48:1.
• In addition, for balanced output: Choose 89:1 or 169:1 based on the load.
• Also, for high torque: Choose 225:1, 392:1, 510:1, 694:1, or 1015:1.
• Next, for encoder use: Use the encoder feedback when speed or position tracking is required.
• Finally, for safe use: Do not run the motor in a stalled state when the table says Forbid stall.

Model: NFP-5882-50ZY-EN, 24V DC

Next, the 24V DC version provides high torque with lower current in many speed options. Therefore, it is useful for stronger 24V drive systems.

Also, this version reaches 200kg.cm rated torque in several high-ratio options. As a result, it can support heavy loads, lifting systems, gates, and industrial mechanisms.

Note: All reduced no-load / rated load speeds have a tolerance of ±10%.

In conclusion, the 24V version covers no-load speeds from 1.5rpm to 440rpm. Also, ratios from 392:1 to 1015:1 provide the strongest rated torque in this table.

24V DC Selection Notes

• First, for higher speed: Choose 16:1, 32:1, or 48:1.
• In addition, for balanced output: Choose 89:1 or 169:1 based on current and load.
• Also, for high torque: Choose 225:1, 392:1, 510:1, 694:1, or 1015:1.
• Next, for feedback control: Use the encoder wiring when the controller needs motor feedback.
• Finally, for safe use: Follow the Forbid stall limits and avoid long overload use.

Single Shaft Worm DC Reduction Gearbox Motor Outline Drawing

Motor Outline and Mounting Reference

First, the outline drawing helps users check the motor body, gearbox size, single shaft output, encoder side, and mounting position. Therefore, it is useful before sample testing and mechanical design.

In addition, the D-shaped output shaft helps increase friction during connection. As a result, the transmission can be more stable and convenient for fixing.

Moreover, the output shaft supports customization. Therefore, users can request changes in length, size, shape, material, and other details when needed.

Mounting Bracket Reference

Next, the 5882-50ZY motor bracket helps users install the motor more easily. Also, the bracket weight is 206G.

In addition, the bracket uses metal material with copper black plating on the surface. Therefore, it can support stable mounting in many product structures.

50ZY Single Shaft Worm DC Gear Motor Encoder Wiring Instructions

Encoder Wiring Diagram

First, the encoder wiring diagram helps users connect motor power and encoder signal wires correctly. Therefore, users should check every wire before power-on.

Also, incorrect wiring may damage the motor or encoder. As a result, the wiring method should be confirmed carefully during sample testing.

Wiring Method

First, the red and black motor wires are used for motor power. Also, the encoder terminal wires are used for power and signal feedback.

• First, motor red wire: Connect to motor power supply positive pole (+).
• In addition, motor black wire: Connect to motor power supply negative pole (-).
• Also, encoder red wire: Connect to encoder power supply positive pole (+), DC 3.3-5V.
• Next, encoder green wire: Use as signal feedback, 6 signals per rotation.
• Moreover, encoder yellow wire: Use as signal feedback, 6 signals per rotation.
• Finally, encoder black wire: Connect to encoder power supply negative pole (-), DC 3.3-5V.

Note: The wiring must not be wrong. Otherwise, it will cause the motor to burn out.

Structure Advantages

First, the D-shaped output shaft is processed and milled to increase friction. Therefore, the transmission is more stable during connection and fixing.

In addition, the all-metal gear design uses high-quality metal gears. As a result, it supports a large transmission ratio, balanced transmission, strong impact resistance, durability, wear resistance, and noise reduction.

Moreover, the high-quality pure copper coil uses a one-time molded rotor and 100% pure copper coil. Therefore, it provides good conductivity, long wear resistance, high temperature resistance, and stable speed.

Finally, the built-in encoder is suitable for feedback control and high current sensing. Also, it can be programmed independently and supports high position repeatability, clear output waveform, and no contacts.

Applications and Selection Tips

Typical Applications

First, this single shaft worm DC reduction gearbox motor is useful for products that need high torque, low speed, encoder feedback, and stable position control. For example, it can work in automation equipment, robots, lifting systems, gates, medical devices, and industrial mechanisms.

• First, automation equipment: The motor can provide strong and controlled movement.
• In addition, robots: Encoder feedback helps support repeatable motion control.
• Also, lifting systems: High-ratio options provide stronger low-speed torque.
• Next, gates and locks: The worm gearbox supports stable position holding.
• Moreover, medical devices: The motor can support controlled heavy-load movement.
• Finally, industrial mechanisms: The 24V version can support stronger drive systems.

How to Choose the Right Version

First, choose the voltage based on the power supply and controller. Also, choose the ratio based on the required speed, torque, current, and stall restriction.

In addition, lower ratios provide faster output speed. Therefore, they are better for faster motion and lighter loads.

Moreover, higher ratios provide slower output and stronger torque. As a result, they are better for heavy-load movement, lifting, gates, locking, and holding tasks.

Final Selection Notes

• First, check voltage: Choose 12V or 24V based on the power supply.
• In addition, check speed: Choose lower ratios when faster output is required.
• Also, check torque: Choose higher ratios when stronger output torque is required.
• Next, check encoder wiring: Confirm DC 3.3-5V encoder power and signal wires before testing.
• Moreover, check stall limits: Do not stall the motor when the table says Forbid stall.
• Finally, test real load: Confirm current, temperature, torque, feedback signal, and service life before production.

In short, the NFP-5882-50ZY-EN single shaft encoder worm gear motor is a strong option for products that need 12V or 24V DC power, 10mm D-shaped shaft, 200Kgf.cm max torque, speed regulation, encoder feedback, and heavy-duty drive performance.

Keywords: worm gear motor, 12V gear motor, 24V DC gear motor, small worm geared motor