6mm Mini DC Gear Motor – 19mm Type Model NFP-609-136-0675 Standard Shaft

6mm Mini DC Gear Motor Model NFP-609-136-0675

First, the NFP-609-136-0675 is a 6mm mini DC gear motor for compact products that need small size, useful torque, and stable speed reduction. Also, it uses a 3V DC motor with a 136.02:1 gearbox ratio.

In addition, this micro planetary gear motor provides 240 ± 15% RPM no-load speed and 24g.cm rated torque. Therefore, it is suitable for small products that need faster output than higher-ratio 6mm gear motors.

Moreover, the motor supports CW and CCW rotation. As a result, it can work in forward and reverse drive systems such as electronic rotating mascaras, robotic mechanisms, and medical equipment.

Main Product Features

• First, compact 6mm body: The small motor size helps fit very tight product spaces.
• In addition, 136.02:1 ratio: The gearbox provides useful speed reduction and stable torque output.
• Also, 3V DC power: The motor is suitable for low-voltage compact devices.
• Next, reversible rotation: CW and CCW rotation support forward and reverse movement.
• Moreover, low noise: The listed noise level is ≤45dB under the test method below.
• Finally, lightweight design: The motor weighs only 1.3g for mini products.

Important Design Notes

• First, specification notice: Above specifications are subject to change without notice, just for reference and customizable according to requirements.
• In addition, plastic output shaft: Plastic output shaft is better to be used in those conditions need small torque, or of no radial load, or via coupling joint.
• Also, real load check: Users should compare rated torque with the real product load before final design.
• Finally, sample testing: Confirm speed, current, torque, noise, and temperature before mass production.

Basic Motor Specifications

First, the table below shows the main motor data. Also, it helps users check voltage, ratio, speed, current, torque, noise, axial gap, weight, and motor length before sample testing.

Note: Noise test method: 10cm away from the reducer, environmental noise 31dB.

Therefore, this 6mm mini DC gear motor is useful when a design needs compact size and moderate low-speed output. In addition, the 18.7mm gear motor length should be checked before housing design.

Miniature DC Gearmotors Outline Drawing

Motor Outline and Mounting Reference

First, the outline drawing helps users check the 6mm popular DC gear motor size, gearbox layout, shaft position, and total length. Therefore, it is useful before sample testing and final product design.

In addition, the 136.02:1 gearbox ratio helps provide a practical balance of speed and torque. As a result, it can support compact products that need controlled movement in a tiny body.

Product Reference Image

Next, the product image below shows the 6mm plastic DC gear motor structure. Also, it helps users review the compact motor body and gearbox assembly before project selection.

Outline Drawing and Design Benefits

• First, small 6mm body: The compact size helps fit very small devices.
• In addition, plastic gearbox: The gearbox can support lightweight compact designs.
• Also, 136.02:1 ratio: The ratio provides useful torque while keeping faster output than ultra-high-ratio versions.
• Next, reversible motion: CW and CCW rotation support two-way movement.
• Moreover, lightweight build: The 1.3g weight helps reduce total product weight.
• Finally, clear dimensions: The drawing helps users design brackets, housings, and fixtures.

6mm Mini DC Gear Motor Mass Production

Mass Production and Custom Support

First, the image below shows 6mm miniature DC gear motor mass production. Also, it helps users understand that this model can support repeat orders and project supply.

In addition, the gear ratio can be adjusted as per buyers’ requirements. Therefore, users can share target voltage, speed, torque, shaft, and quantity before sample or bulk orders.

Mass Production Benefits

• First, stable supply: Mass production helps support repeat customer orders.
• In addition, custom ratio: Gear ratio can be adjusted based on speed and torque needs.
• Also, compact assembly: The 6mm gearbox helps fit very small product structures.
• Next, RoHS compliant gearbox: The plastic gearbox material supports RoHS requirements.
• Moreover, project matching: Voltage, shaft, speed, and torque can be reviewed for each project.
• Finally, sample support: Users can test real load performance before mass production.

Applications and Selection Tips

Typical Applications

Finally, these 6mm precision gear motors are widely used in compact products that need small size, stable output, and controlled torque. For example, they can work in electronic rotating mascaras, robotic mechanisms, medical equipment, and mini drive modules.

• First, electronic rotating mascaras: The small motor size helps fit compact beauty devices.
• In addition, robotic mechanisms: The gearbox can support controlled small movement.
• Also, medical equipment: The compact body helps fit mini internal structures.
• Next, mini drive modules: The motor can support small push, pull, or rotation tasks.
• Moreover, custom gear motor projects: The ratio can be adjusted to match special product needs.
• Finally, precision small devices: The low-speed output helps support controlled movement.

How to Choose This Motor

First, check whether the product can use a 3V DC motor. Also, compare the 240 ± 15% RPM no-load speed with the target output speed.

In addition, check whether 24g.cm rated torque is enough for the normal working load. Therefore, real load torque should be confirmed before final design.

Moreover, check the output shaft material and radial load condition. As a result, plastic output shaft use should be limited to small torque, no radial load, or coupling joint conditions.

Final Selection Notes

• First, check voltage: Use a 3V DC power supply.
• In addition, check ratio: Confirm the 136.02:1 gearbox ratio before speed calculation.
• Also, check speed: Compare 240 ± 15% RPM no-load speed and 175 ± 15% RPM rated speed with the product target.
• Next, check torque: Compare 24g.cm rated torque and 100g.cm stall torque with the real load.
• Moreover, check noise: Confirm noise under the real housing and load condition.
• Finally, check life: Test current, speed, torque, noise, temperature, and gearbox life before mass production.

In short, the NFP-609-136-0675 is a 6mm mini DC gear motor for products that need 3V DC power, compact size, 136.02:1 reduction, moderate low-speed output, and useful torque in a very small gearbox.

Keywords: custom gear motors, micro planetary gear motor, custom gearmotors, custom OEM gear motors, DC gear motor custom, custom gear motor manufacturers