6mm Mini DC Gear Motor – 17mm Type Model NFP-609-26.45-0675 Standard Shaft

6mm Mini DC Gear Motor – 17mm Type Motor Model NFP-609-26.45-0675 Performance

First, the NFP-609-26.45-0675 is a 6mm mini DC gear motor for compact products that need high speed, small size, and stable gearbox output. Also, it uses a 3V DC motor with a 26.45:1 gearbox ratio.

In addition, this micro planetary gear motor provides 1,200 ± 15% RPM no-load speed and 5g.cm rated torque. Therefore, it is suitable for small products that need faster output than higher-ratio 6mm gear motors.

Moreover, the motor supports CW and CCW rotation. As a result, it can work in forward and reverse drive systems such as electronic rotating mascaras, robotic mechanisms, and medical equipment.

Main Product Features

• First, compact 6mm body: The small motor size helps fit very tight product spaces.
• In addition, 26.45:1 ratio: The gearbox provides high-speed output with useful torque.
• Also, 3V DC power: The motor is suitable for low-voltage compact devices.
• Next, reversible rotation: CW and CCW rotation support forward and reverse movement.
• Moreover, low noise: The listed noise level is ≤ 45dB under the test method below.
• Finally, lightweight design: The motor weighs only 1.2g for mini products.

Important Design Notes

• First, specification notice: Above specifications are subject to change without notice, just for reference and customizable according to requirements.
• In addition, plastic output shaft: Plastic output shaft is better to be used in those conditions need small torque, or of no radial load, or via coupling joint.
• Also, real load check: Users should compare rated torque with the real product load before final design.
• Finally, sample testing: Confirm speed, current, torque, noise, and temperature before mass production.

Basic Motor Specifications

First, the table below shows the main motor data. Also, it helps users check voltage, ratio, speed, current, torque, noise, axial gap, weight, and motor length before sample testing.

Note: Noise test method: 10cm away from the reducer, environmental noise 31dB.

Therefore, this 6mm mini DC gear motor is useful when a design needs compact size and faster low-voltage gearbox output. In addition, the 16.4mm gear motor length should be checked before housing design.

6mm Planetary DC Gearmotor Outline Drawing

Compact Design for Precision Applications

First, the 6mm mini DC gear motor NFP-609-26.45-0675 is built with a compact 6mm diameter. Therefore, it is a good choice for applications that need motion control in confined spaces.

In addition, its small footprint allows easy setup in compact devices. For example, it can fit electronic rotating mascaras, robotic mechanisms, medical equipment, and other mini drive products.

High Speed and Useful Torque

Also, this micro planetary gear motor provides a 26.45:1 ratio. As a result, it offers faster output speed than many higher-ratio 6mm gear motor options.

Moreover, the motor reaches 1,200 ± 15% RPM no-load speed and 900 ± 10% RPM rated speed. Therefore, it is suitable for designs that need faster motion with controlled torque.

Reliable Performance at Low Voltage

Next, this motor is designed to operate at 3V DC. Therefore, it can support battery-powered products and compact electronic devices.

In addition, the motor provides 5g.cm rated torque and 22g.cm stall torque. As a result, it can support light-duty motion tasks in small products.

Durable and Customizable Construction

Furthermore, the gearbox is made of plastic material and is RoHS compliant. Also, the gear ratio can be adjusted according to specific requirements.

As a result, this motor can support custom applications in robotics, consumer electronics, and medical device projects.

Quiet Operation for Noise-Sensitive Environments

Finally, the listed noise level is ≤45dB. Therefore, the motor can support products where quiet operation is important.

In addition, its smooth and quiet performance can improve user experience in medical equipment, consumer electronics, and compact personal care products.

Outline Drawing and Design Benefits

• First, small 6mm body: The compact size helps fit very small devices.
• In addition, fast output: The 26.45:1 ratio provides higher speed than high-ratio versions.
• Also, plastic gearbox: The gearbox can support lightweight compact designs.
• Next, reversible motion: CW and CCW rotation support two-way movement.
• Moreover, lightweight build: The 1.2g weight helps reduce total product weight.
• Finally, clear dimensions: The drawing helps users design brackets, housings, and fixtures.

Applications and Selection Tips

Typical Applications

Finally, these 6mm precision gear motors are widely used in compact products that need small size, stable output, and controlled speed. For example, they can work in electronic rotating mascaras, robotic mechanisms, medical equipment, and mini drive modules.

• First, electronic rotating mascaras: The small motor size helps fit compact beauty devices.
• In addition, robotic mechanisms: The gearbox can support controlled small movement.
• Also, medical equipment: The compact body helps fit mini internal structures.
• Next, mini drive modules: The motor can support small push, pull, or rotation tasks.
• Moreover, hobby motors and gears: The compact gearbox can fit small model projects.
• Finally, custom gearbox projects: The gear ratio can be adjusted to match special product needs.

How to Choose This Motor

First, check whether the product can use a 3V DC motor. Also, compare the 1,200 ± 15% RPM no-load speed with the target output speed.

In addition, check whether 5g.cm rated torque is enough for the normal working load. Therefore, real load torque should be confirmed before final design.

Moreover, check the output shaft material and radial load condition. As a result, plastic output shaft use should be limited to small torque, no radial load, or coupling joint conditions.

Development Samples

Also, sampling quantities for stocked models are available for ordering directly from us online. Therefore, users can test the motor before production.

Engineering and Manufacturing Support

Finally, please contact one of our sales engineers for a quotation for production. In addition, customization and integration services can be reviewed based on your project requirements.

Final Selection Notes

• First, check voltage: Use a 3V DC power supply.
• In addition, check ratio: Confirm the 26.45:1 gearbox ratio before speed calculation.
• Also, check speed: Compare 1,200 ± 15% RPM no-load speed and 900 ± 10% RPM rated speed with the product target.
• Next, check torque: Compare 5g.cm rated torque and 22g.cm stall torque with the real load.
• Moreover, check noise: Confirm noise under the real housing and load condition.
• Finally, check life: Test current, speed, torque, noise, temperature, and gearbox life before mass production.

In short, the NFP-609-26.45-0675 is a 6mm mini DC gear motor for products that need 3V DC power, compact size, 26.45:1 reduction, fast gearbox output, and lightweight design.

Keywords: geared motors UK, hobby motors and gears, motor gearbox, micro gear motor with encoder, DC motor gearbox