20mm Standard Gear Motor Model NFP-GM20-180SH

6V, 12V, 24V Micro Metal Gearmotor Model NFP-GM20-180SH Description

First, the NFP-GM20-180SH is a 20mm micro metal gearmotor for compact drive systems. Also, it supports 6V DC, 12V DC, and 24V DC motor options.

In addition, this gear motor provides high torque output with multiple reduction ratios. Therefore, users can choose a suitable speed and torque level for smart devices, robots, camera gimbals, and small automation systems.

Moreover, the metal gearbox helps support stronger transmission in a compact body. As a result, it is useful for products that need stable low-speed motion and higher output force.

Main Product Features

• First, 20mm metal gearbox: The compact gearbox helps save installation space.
• In addition, voltage options: The motor supports 6V DC, 12V DC, and 24V DC systems.
• Also, high torque output: Higher ratios provide stronger low-speed drive force.
• Next, wide ratio range: Ratios from 29:1 to 488:1 support different speed and torque needs.
• Moreover, metal gear structure: The gearbox helps improve strength and service life.
• Finally, smart product use: The motor is suitable for selfie sticks, gimbals, robots, and compact mechanisms.

Single Motor Technical Data

First, the table below compares the single motor data before gearbox reduction. Also, it helps users check voltage, no-load speed, current, output power, stall torque, and stall current.

Therefore, users can choose the correct base motor before selecting the final reduction ratio.

In addition, the 24.0V DC motor provides the highest listed no-load speed, output power, and stall torque in this table. However, the final gearbox output also depends on the selected ratio.

As a result, users should compare voltage, current, output power, torque, and gearbox size before final selection.

NFP-GM20-180SH Gear Motor Performance Data

Gear Motor NFP-GM20-180SH-09450-XXX Technical Data

First, the NFP-GM20-180SH-09450-XXX version uses a 12.0V DC base motor. Also, it provides a 4,400rpm no-load speed before gearbox reduction.

Therefore, this version is useful for compact 12V systems that need stable low-speed output and moderate current use.

Note: All reduced no-load speeds have a tolerance of ±15%.

As a result, the 12.0V version covers no-load speeds from 9rpm to 145rpm. Moreover, the 456:1 and 488:1 ratios provide the strongest rated torque in this table.

12.0V DC Selection Notes

• First, for higher speed: Choose 29:1, 31:1, 56:1, or 73:1.
• In addition, for balanced output: Choose 107:1 or 182:1 based on the load.
• Also, for higher torque: Choose 268:1, 349:1, 456:1, or 488:1.
• Finally, for size planning: Check the 15.9mm to 20.4mm gearbox length before design.

Gear Motor NFP-GM20-180SH-18140-XXX Technical Data

Next, the NFP-GM20-180SH-18140-XXX version uses a 6.0V DC base motor. Also, it provides a 7,000rpm no-load speed before gearbox reduction.

Therefore, this version is useful for 6V products that need higher motor output and stronger compact drive force.

Note: All reduced no-load speeds have a tolerance of ±15%.

Therefore, the 6.0V version covers no-load speeds from 14rpm to 230rpm. In addition, ratios from 268:1 to 488:1 provide the strongest rated torque in this table.

6.0V DC Selection Notes

• First, for higher speed: Choose 29:1, 31:1, 56:1, or 73:1.
• In addition, for balanced output: Choose 107:1 or 182:1 based on the load.
• Also, for higher torque: Choose 268:1, 349:1, 456:1, or 488:1.
• Finally, for 6V systems: Use this version when the product uses a 6.0V DC power supply.

Gear Motor NFP-GM20-180SH-10400-XXX Technical Data

Furthermore, the NFP-GM20-180SH-10400-XXX version uses a 24.0V DC base motor. Also, it provides the highest listed base motor speed and output power.

As a result, this version is useful when the design needs a 24V supply, higher speed, and stronger motor output.

Note: All reduced no-load speeds have a tolerance of ±15%.

In conclusion, the 24.0V version covers no-load speeds from 21rpm to 340rpm. Also, this version provides the highest listed rated speeds among the three gearbox motor groups.

24.0V DC Selection Notes

• First, for higher speed: Choose 29:1, 31:1, 56:1, or 73:1.
• In addition, for balanced output: Choose 107:1 or 182:1 based on the load.
• Also, for higher torque: Choose 268:1, 349:1, 456:1, or 488:1.
• Finally, for 24V systems: Use this version when the product uses a 24.0V DC power supply.

Performance Selection Notes

• First, choose voltage: Use 6V, 12V, or 24V based on the power supply.
• In addition, choose ratio: Select lower ratios for speed and higher ratios for torque.
• Also, check length: Gearbox length ranges from 15.9mm to 20.4mm.
• Next, check torque: Compare rated torque and max peak torque with the real load.
• Moreover, check current: Make sure the driver can support the selected motor current.
• Finally, test real load: Confirm current, speed, torque, noise, and temperature before production.

NFP-GM20-180SH Micro Metal Gearmotor Outline Drawing

Motor Outline and Mounting Reference

First, review the outline drawing before building the motor into your product. Also, check the gearbox diameter, motor length, shaft position, and mounting space.

Therefore, the drawing can help reduce fitting problems during design and assembly. In addition, it helps users confirm whether the selected gearbox length fits the housing.

Are you looking for a motor plus gearbox? As a result, this model can provide a suitable compact solution for many small drive systems.

Outline Drawing and Design Benefits

• First, 20mm gearbox: The compact gearbox helps save installation space.
• In addition, metal gear structure: The gearbox helps support stronger transmission.
• Also, voltage options: Users can choose 6V, 12V, or 24V DC versions.
• Next, wide ratio range: Ratios from 29:1 to 488:1 support different speed and torque needs.
• Moreover, variable gearbox length: The gearbox length ranges from 15.9mm to 20.4mm.
• Finally, clear dimensions: The drawing helps users design brackets, housings, and fixtures.

Small Gear Motor GM20-180SH Mass Production

Mass Production and Custom Support

First, the image below shows small gear motor mass production. Also, it helps users understand that this model can support repeat orders and project supply.

In addition, the NFP-GM20-180SH can be reviewed for custom voltage, shaft, wiring, connector, speed, and ratio needs. Therefore, users can share project details before sample or bulk orders.

Mass Production Benefits

• First, stable supply: Mass production helps support repeat customer orders.
• In addition, model options: Users can choose 6V, 12V, or 24V motor versions.
• Also, ratio options: Users can choose the right speed and torque range.
• Next, custom support: Shaft, wire, connector, and speed options can be reviewed.
• Moreover, compact assembly: The small gearbox helps fit smart product structures.
• Finally, project service: Samples and bulk orders can be matched to real product needs.

Applications and Selection Tips

Typical Applications

Finally, this micro metal gearmotor is useful for compact products that need high torque, stable motion, and flexible voltage choices. For example, it can work in smart selfie sticks, smart camera gimbals, smart robot camera corners, smart micro robots, and small automation systems.

• First, smart selfie sticks: The motor can support compact extension or rotation parts.
• In addition, smart camera gimbals: The gearbox helps provide stable low-speed movement.
• Also, smart robot camera corners: The motor can support small angle adjustment systems.
• Next, smart micro robots: The gearmotor can drive wheels, arms, and compact motion modules.
• Moreover, automation modules: The metal gearbox can support repeat low-speed drive tasks.
• Finally, compact mechanisms: Higher ratios can provide slower and stronger motion.

How to Choose the Right Version

First, choose the base motor voltage based on the power supply. Also, choose the ratio based on output speed, rated torque, max peak torque, and gearbox length.

In addition, lower ratios provide faster output speed. Therefore, they are better for quick movement and lighter loads.

Moreover, higher ratios provide slower output and stronger max peak torque. As a result, they are better for compact force-driven tasks.

Final Selection Notes

• First, check voltage: Choose 6V, 12V, or 24V based on the power supply.
• In addition, check motor model: Compare speed, current, output power, and stall data.
• Also, check ratio: Choose 29:1 to 488:1 based on speed and torque needs.
• Next, check gearbox length: Confirm 15.9mm to 20.4mm gearbox length before design.
• Moreover, check torque: Use rated torque for normal load and max peak torque for short load changes.
• Finally, test real load: Confirm current, speed, torque, noise, temperature, and service life before mass production.

In short, the NFP-GM20-180SH is a compact 20mm micro metal gearmotor for products that need 6V, 12V, or 24V DC power, high torque output, metal gearbox strength, and flexible 29:1 to 488:1 ratio options.

Keywords: heavy-duty gear motor, 20mm DC motor, industrial motor, NFP-GM20-180SH, electric wheelchair motor, industrial mixer motor