37mm Metal DC Brush Encoder Motor − 65mm Type Model NFP-RS-555-EN
$15.00
Choose the reliable 555 dc metal motor with encoder for your needs, featuring a protective cover and outstanding conductivity. Purchase today!
Metal Brush DC Motor with Encoder Parameters
The NFP-RS-555 is a metal brush DC motor with a Hall encoder for speed feedback and direction feedback. It includes 6V DC, 12V DC, and 24V DC options for different speed, current, and torque needs.
First, the rotor uses pure copper wire winding. Also, pure copper wire has low resistance and high conductivity. Therefore, it can help increase motor torque and support stable output.
In addition, the Hall encoder comes with a dustproof protection cover. As a result, the encoder area can stay cleaner during normal product use.
Main Product Features
- First, voltage options: The motor supports 6V DC, 12V DC, and 24V DC versions.
- In addition, encoder feedback: The AB dual-phase Hall encoder provides square wave feedback.
- Also, pure copper winding: The rotor winding helps improve conductivity and torque output.
- Next, CW and CCW rotation: The motor can support forward and reverse rotation.
- Finally, standard connector: The interface uses an XH2.54-6PIN terminal connector.
RS-555 Metal Brush DC Motor Performance Data
Next, the table below helps users compare voltage, speed, current, rated torque, stall torque, and stall current. Therefore, it is easier to choose the right RS-555 encoder motor for a product design.
| Model | NFP-RS-555 | NFP-RS-555 | NFP-RS-555 |
|---|---|---|---|
| Voltage | 6V DC | 12V DC | 24V DC |
| No-load Current | ≤350mA | ≤400mA | ≤500mA |
| No-load Speed | 3900±10% RPM | 8000±10% RPM | 16000±10% RPM |
| Rated Torque | 200 g.cm | 400 g.cm | 800 g.cm |
| Rated Speed | 3300±10% RPM | 6700±10% RPM | 10000±10% RPM |
| Rated Current | ≤2A | ≤3.5A | ≤6.5A |
| Stall Torque | ≥1 kg.cm | ≥2 kg.cm | ≥3 kg.cm |
| Stall Current | ≤9A | ≤18.5A | ≤37A |
Also, the 24V DC version provides the highest no-load speed and rated torque. However, the 6V DC version is useful for lower-voltage systems.
As a result, users can choose the 24V model for higher speed and torque, or choose the 6V and 12V models for lower-voltage control systems.
Miniature DC 555 Brushed Motor Outline Drawing
First, the outline drawing shows the NFP-RS-555 encoder motor body, shaft, encoder cover, and mounting structure. Therefore, users can check the motor fit before final product design.
In addition, the motor weighs approximately 230g. As a result, engineers can review the weight and size together before using it in compact drive systems.
Outline Drawing and Design Benefits
- First, encoder protection cover: The Hall encoder has a dustproof cover.
- In addition, metal brush motor body: The RS-555 structure supports stable brushed DC motor output.
- Also, pure copper winding: The winding helps support stronger torque and lower resistance.
- Next, CW and CCW rotation: The motor can match forward and reverse drive needs.
- Finally, standard interface: The motor uses an XH2.54-6PIN terminal connector.
Miniature RS 555 Brush DC Motor Encoder Wiring
Next, the encoder wiring image helps users check the connection layout before testing. Therefore, it can reduce wiring mistakes during motor setup.
In addition, the encoder supports AB dual-phase incremental magnetic Hall output. As a result, it can provide speed and direction feedback for MCU-based control systems.
Encoder Wiring and Signal Benefits
- First, AB phase output: The encoder provides square wave A and B phase signals.
- In addition, MCU support: The built-in pull-up resistor allows direct connection to an MCU.
- Also, standard cable: The XH2.54 6-pin interface includes a standard cable.
- Next, high response: The response frequency reaches 100 kHz.
- Finally, pulse feedback: The basic pulse count is 17 PPR.
Encoder Specifications
Also, the encoder specification table helps users check signal type, supply voltage, interface type, response frequency, and pulse count. Therefore, it is easier to match the encoder with a control board.
| Parameter | Specification |
|---|---|
| Type | AB dual-phase incremental magnetic Hall encoder |
| Linear Speed | Basic pulse 17 PPR × gear reduction ratio |
| Supply Voltage | DC 3.3 V / DC 5.0 V |
| Basic Function | Built-in pull-up resistor, direct connection to MCU |
| Interface Type | XH2.54 6-pin (standard cable included) |
| Output Signal Type | Square wave, AB phase |
| Response Frequency | 100 kHz |
| Basic Pulse Count | 17 PPR |
In addition, the linear speed pulse value is calculated as 17 PPR × gear reduction ratio. As a result, users can calculate the final output pulse count based on the gearbox ratio.
Typical Applications
Finally, this RS-555 brushed DC motor with encoder is suitable for products that need speed feedback, direction feedback, and stable torque output. For example, it can work in robotics, automation systems, and custom drive units.
- Robotics
- Automation equipment
- Smart machinery
- Electric tools
- Speed feedback drive systems
- Position control projects
- Custom brushed DC motor assemblies
In short, the NFP-RS-555 metal brush DC motor with encoder is a good fit for products that need 6V, 12V, or 24V DC power, AB phase Hall feedback, pure copper winding, and reliable brushed motor performance.
Keywords: rs 555 dc motor, brushed dc motor, miniature dc motor, small dc motor, carbon brush dc motor, 555 dc motor encoder
1.Payment methods : Paypal, T/T
Shipping:
1.Delivery: DHL/FedEx 3-5 days.
2.Item will be shipped within 1-3 business days after the payment.
3.If you haven’t received the item on the Delivery Time, pls contact us by email if you have any questions. Normally, we will give you a reply within 24 hours, if not, pls check the spam of your email box. We will do our best to help you solve the problems.
4.Please make sure your address is matched with the finally shipping address before you pay.
FAQ
Q: If customized, what information should you provide?
A: You need to provide the basic specification of the motor, such as: Dimensions, Sizes Applications, Voltage, Speed and Torque. It’s better to offer application prototype drawings to us if possible.
Q: What’s your main motors?
A: Diameter 4mm~42mm Dc Micro Motor And Gear Motor, Auto Dc Motor, Electric Motor, Gear Motor, Mini Dc Motor, Brush Dc Motor, Brushless Dc Motor, Spur Gear Motor, Micro Motor, Vibration Motor Etc.
Q: What’s the main application of the micro dc motor?
A: Our mini DC motors are widely used in Home Applications, Office Equipment, Health-Care Application, Sanitation Industry, High-Class Toy, Banking System, Electronic and Electrical Tools, Automation Industry, Bank Equipments, Payment Equipments, Vending Machines, Power Door Lock, Electric Door Lock.
Reviews